SMESHARIKI FROM PLASTICINE DO IT YOURSELF STEP BY STEP WITH PHOTOS

In our country there are a lot of interesting entertaining circles associated with needlework. One of the most common is the molding of various figures of plasticine. This type of occupation allows children to develop fine motor skills of hands, imagination, and also to show their creative potential.

In addition, plasticine can sculpt your favorite cartoon characters. And then with their participation come up with an interesting story. The simplest in modeling and familiar to almost every child are the cartoon characters of Smeshariki. They can become not only an ornament of a children's shelf, but also original toys.

Rules for sculpting small figures of plasticine

Plasticine modeling of various figures provides for the following requirements:

Purity. Before the process itself, it is necessary to remove all unnecessary items from the work surface so that the lesson takes place in a comfortable environment.
Workplace. It is best if this is a table, the surface of which must be necessarily covered with paper or oilcloth. So you can avoid contamination of the working surface.
Plasticine. In this case, the material for modeling should be bright and colorful. It is best if it is in sets.
To make it easier for the child to sculpt the figures, the plasticine mass must be elastic. If the material is too hard, it must first be held in warm water for a few minutes.
For ease of use of clay, you should take care of the presence of toothpicks and a plastic knife.
To make it easier to blind the desired figure and repeat all the unique details, you need to have on hand a picture with one or another cartoon character.

Instructions for modeling Smesharikov from clay

These animated characters are bright and original, and therefore any child, regardless of gender and age, will be interested in creating them from clay. In addition, each figure differs from the other in its individuality.

To make Smeshariki the most beautiful and diverse, it is recommended to use additional accessories for them.

For example, each character can be inserted into the paws stuck together flowers, a basket or something else like that.

All the characters of the famous cartoon are distinguished by their originality and individuality, so the process of their modeling should be considered individually.

Sculpt Barash

Barash is a cute, thoughtful character, to make it out of the plasticine mass:

sculpt a pink ball, this will be the basis for the future figure. If there is no pink color, you can use light lilac clay;
make a lot of smaller balls. The color should be the same as for the base;
attach small balls to the base;
the ears and paws are formed from the pink mass and are attached to the main ball;
the eyes are made of white material, and the pupils are made of black;
hoofs, horns, spout, and Barashik's brows are formed from dark brown plasticine;
Two small thin strips are made of red material, this will be the character's mouth.

Then all the formed elements of Barashik are attached to the previously made base.

Create Nyusha

Nyusha is considered the most romantic Smesharik. To make this heroine of clay, you need to perform the following steps:

As in the case of Barashik, the base is made of a pink ball.
Further, white eyes are formed, and black pupils are attached to them in the center.
Since Nyusha is romantic in nature and loves to make eyes, she needs to attach eyelids and red cilia, which are mounted at the top of the eyes.
The spout is made of a round form of red material and is attached to the head.
To form a hairstyle, it is necessary to make two red plates and fix them on the back of the head.
Attached to the plates are fixed small balls, forming a kind of two braids. They must end with tails.
A commensurate white flower can be attached to the tails obtained.
The extremities of such a romantic Smesharik are made of pink clay, and the claws are made of red.

How to make Losyash do it yourself

This cartoon character is a very inquisitive character. That is why it is very popular with children. To mold such a plasticine hero, you need:

take a yellow plasticine mass and mold a ball - the base of the crafts;
make white eyes with black pupils and yellow eyelids;
Losyash's nose is large, triangular. For its manufacture will need a brown material. The resulting triangular nose should be attached between the character's eyes at a sharp angle;
Smesharik's hands and feet are made of yellow plasticine;
Do not forget about the horns and eyebrows, which should be brown.

How to blind Sovunya

According to the plot of the animated film, Sovunya is a cheerful and active owl, with good physical preparation. In addition, this character loves discipline and cleanliness, and therefore does not tolerate a violation of order in anything. Plasticizing Sovunyi is made as follows:

A piece of purple material is taken from which the base ball rolls down.
From the same color are made triangular ears, which are mounted in the upper part of the base.
White is best for eyes, and black or navy for pupils.
Thin stripes are formed above the eyes - eyelids.
For the manufacture of the beak, you will need a red material that rolls down with a cone, after which it is attached to the head of the cartoon hero.
Then a notch is made on the attached cone with a toothpick.
The wings can be made purple, the color of the base, and the legs are best black or dark brown.

Making Pina

Pin is a scientist penguin who loves to invent and design. In each new series, the cartoon penguin will definitely make something new. The most memorable inventions are Iron Nanny, who helps with the housework, and robot Bibi, preparing to fly into space. Step-by-step modeling of this hero has the following form:

the base is made in the form of a black ball;
the eyes of this Smesharik are made in the image and likeness of the other characters listed above;
the beak has the shape of a cone and is molded of red material;
the resulting red cone needs to be flattened and a narrow notch is made, and then stuck under the eyes;
Do not forget about the main accessory penguin - a beautiful hat. It is made from brown mass;
in addition, Aviator glasses, which are made of black and blue material, should be attached to Pina’s hat;
The base of the penguin differs from other characters in the presence of a white tum. To make it, you will need to roll out a small white lozenge and stick it in the middle of the base.
the hero's paws are red, and the wings are black. Therefore, for their sculptures you need to choose the appropriate shades.

How to make a whole cartoon

When all the cartoon characters are ready, they can play and invent their own stories. And if you strain your imagination a little, you can make a real animated film with your own hands. To create such a masterpiece, in addition to fantasy, the following materials and devices will be needed:

Figures cartoon characters.
Wooden toothpicks (in this case, the longer they are, the better).
Video camera.
Beautiful background, which can be done as follows:

take a thick sheet of paper;
bend it in half;
decorate one half of the cardboard with green grass, flowers or trees of plasticine;
decorate the second, upper half with clouds and sunshine.

It turns out that the first half will be the base of the removable platform that needs to be attached to a flat surface. Further, each figure of a cartoon character is neatly strung on a toothpick, with which you can move Smeshariki.

When everything is ready for shooting, one person moves the figures on a previously prepared background and tells a certain story. At this time, the second person directs the camcorder lens at the cartoon characters and takes pictures.